1, the discharge of toxic and harmful gases in the drainage pipe to meet the health requirements;

2. The air pipe adds fresh air to the reservoir, the water tank and the drainage pipe to reduce corrosion and prolong the service life of the metal pipe;

3, reservoir, water tank ventilation should be set up two or more of the pipe to improve the capacity of the drainage system, (for example, when a drip bottle down to liquid outflow, must be inserted a snorkel, one end through the atmosphere, through the gap between the end surface and the bottom of the bottle, the negative pressure, to prevent the formation of to ensure the smooth drainage pipe) to prevent stagnant water formation, odor, reduce the pressure fluctuation, the protection of water, to prevent water damage.

4, the water tank and the water tank can be quickly discharged steam and harmful gases, built-in gauze net can effectively prevent the prevention of vectors, insects and dust into the water to destroy water quality.

Material list of breather tube parts:

1, vertical tube: support education, tube body, vertical bar, block, support plate 1, support plate 2.

2: inner cover: roof, cover, floor, synthetic fiber mesh, gauze, synthetic fiber network.

3: cover: cover top, cover body.

4 bolts.

5 washer.

6 bolts.

7 washer.

Inner cover description:

1. The inner cover can be made of non-toxic nonmetallic materials, and the welds and burrs should be polished after welding.

2. Strainer and cloth installation shall be done after rust removing in Inner cover.

3, the filter, cloth installation, the use of the same material suture.

Model: Z-200, Z-300, Z-400, Z-600

Height: H3=0, H3=500, H3=1000

The above is the hood type breather pipe specifications, models, materials, the role of a brief introduction, to understand the overall hood type ventilation tube information, please contact the phone.